Product Introduction

Compact guide cylinders are specified where a plain cylinder cannot guarantee rotation-free motion, for example when a gripper or tool plate is mounted directly on the rod. The MGPM25-50 answers that need with a 25 mm bore and 50 mm stroke in a thin, space-saving package.

Common installations are guided pushers, clamping mechanisms and tool changers on standard automation machinery where repeatable short strokes are required.

Two parallel guide rods running in slide bearings take the side forces that would otherwise bend a single piston rod, which is what allows this thin cylinder to stay accurate in offset-loading applications.

Four mounting styles and two-direction piping keep installation flexible, while the MGPM series is produced on request with wholesale and OEM/ODM terms.

Key Features

MGPM25-50 compact guide cylinder with 25 mm bore and 50 mm stroke
Dual guide rods with slide bearings prevent rotation and resist lateral loads
Thin, space-saving profile reduces the mounting envelope inside machines
Port with Rc threaded connection and double-acting operation
Four mounting styles and two-direction piping for flexible layouts
Balanced rigidity and size for general automation duties
Manufactured on demand with wholesale and OEM/ODM support

Applications

Pick-and-place on packaging equipment
Tooling fixtures with side-mounted loads
Automated handling systems requiring high rigidity

FAQ

Q: What is the MGPM25-50?

A: The MGPM25-50 is a 25 mm bore, 50 mm stroke compact guide pneumatic cylinder with dual guide rods, suitable for short-stroke non-rotating linear motion.

Q: What port size does the MGPM25-50 use?

A: The port uses an Rc threaded connection sized for the 25 mm bore, following the standard of the MGPM series.

Q: Is a 20-25 mm bore guide cylinder suitable for assembly line pick-and-place?

A: Yes. Medium-bore models are widely used for assembly line pick-and-place, clamping and press assists, offering higher rigidity for side-mounted tooling.

Q: Can you manufacture the MGPM25-50 for our order?

A: Yes. The MGPM25-50 and other MGPM series models are produced on demand with factory-direct pricing, OEM/ODM support and wholesale packaging available.

Request a Quote - Factory direct wholesale and OEM/ODM orders welcome.

Technical Specification

Parameter	Value
Model	MGPM25-50
Type	Compact guide cylinder (dual guide rod, slide bearing)
Bore size	25 mm
Stroke	50 mm
Action	Double acting
Working medium	Filtered air
Working pressure	0.15 - 1.0 MPa
Proof pressure	1.5 MPa
Operating temperature	-10 to 60 ℃
Port size	Rc threaded port (sized per bore)
Guide bearing	Slide bearing
Magnetic switch	Not included (standard)
Mounting	4 styles
Piping	2 directions