Product Introduction

Compact guide cylinders are specified where a plain cylinder cannot guarantee rotation-free motion, for example when a gripper or tool plate is mounted directly on the rod. The MGPM12-20 answers that need with a 12 mm bore and 20 mm stroke in a thin, space-saving package.

Typical duties for this small guide cylinder include feeding light parts, lowering and raising small tooling, and holding compact fixtures inside automated work cells.

Two parallel guide rods running in slide bearings take the side forces that would otherwise bend a single piston rod, which is what allows this thin cylinder to stay accurate in offset-loading applications.

Four mounting styles and two-direction piping keep installation flexible, while the MGPM series is produced on request with wholesale and OEM/ODM terms.

Key Features

MGPM12-20 compact guide cylinder with 12 mm bore and 20 mm stroke
Dual guide rods with slide bearings prevent rotation and resist lateral loads
Thin, space-saving profile reduces the mounting envelope inside machines
Port M5 x 0.8 and double-acting operation
Four mounting styles and two-direction piping for flexible layouts
Compact footprint suited to tight fixtures and small machines
Manufactured on demand with wholesale and OEM/ODM support

Applications

Electronics assembly fixtures and small pick-and-place heads
Light parts feeding and positioning mechanisms
Compact work cells needing rotation-free short strokes

FAQ

Q: What is the MGPM12-20?

A: The MGPM12-20 is a 12 mm bore, 20 mm stroke compact guide pneumatic cylinder with dual guide rods, suitable for short-stroke non-rotating linear motion.

Q: What port size does the MGPM12-20 use?

A: The port size is M5 x 0.8, standard for 12 mm bore guide cylinders.

Q: What applications fit a 12-16 mm bore guide cylinder?

A: Guide cylinders in this size range are commonly used in electronics assembly, small pick-and-place heads and light positioning fixtures where space is limited.

Q: Can you manufacture the MGPM12-20 for our order?

A: Yes. The MGPM12-20 and other MGPM series models are produced on demand with factory-direct pricing, OEM/ODM support and wholesale packaging available.

Request a Quote - Factory direct wholesale and OEM/ODM orders welcome.

Technical Specification

Parameter	Value
Model	MGPM12-20
Type	Compact guide cylinder (dual guide rod, slide bearing)
Bore size	12 mm
Stroke	20 mm
Action	Double acting
Working medium	Filtered air
Working pressure	0.15 - 1.0 MPa
Proof pressure	1.5 MPa
Operating temperature	-10 to 60 ℃
Port size	M5 x 0.8
Guide bearing	Slide bearing
Magnetic switch	Not included (standard)
Mounting	4 styles
Piping	2 directions