The MCGB series is designed for space-saving and easy-to-install automation applications. The supplied product information lists dual-side piping, three body mounting options, four grooves for embedded sensors and magnetic equipment throughout the series. This guide explains the MCGB-03 model code and shows how to match bore and stroke for compact assembly fixtures, small clamping mechanisms, vision-assisted positioning, pick-and-place and sorting equipment, and modular automation systems.
Learn how to select an MCGB guide rod cylinder by understanding its model code, bore and stroke combinations, dual-side piping, mounting options, sensor grooves and typical automation applications. Here are the key MCGB Series Product Features:
1.Dual Guide Rods for Stable Linear Motion
The dual-guide design provides more stable axial constraint for the output component and is suitable for positioning fixtures, pressing, pick-and-place and vision-assisted assembly. It does not mean that the cylinder can withstand arbitrary impact, rotary loads or lateral loads. When a load has a significant eccentricity or continuous lateral force, the load, eccentric distance and cycle frequency must still be checked.
2. Space-Saving Design for Compact Equipment
The MCGB series integrates the drive and guiding functions for automation mechanisms with limited installation space. Compared with a solution that requires a separate linear bearing or external rail, an integrated structure can reduce the number of components and the installation footprint. The designer must nevertheless check the fully extended length, surrounding interference and maintenance clearance.
3. Dual-Side Piping for Flexible Layouts
The product supports piping from two sides. In fixtures, slides and modular equipment, this makes it easier to select a connection direction that suits the air circuit and cable layout. It can also help reduce hose bending and assembly interference. During installation, leave enough room for fittings, hose bend radius and removal.
4. Three Body Mounting Options
The MCGB series provides three body mounting options to accommodate bottom-plate, side-plate and mechanism-direction requirements. Selection should include more than the body mounting type: verify screw positions, mounting-hole spacing, output-end connections and clearance from adjacent components.
5. Four Grooves and Magnetic Equipment for Position Sensing
The cylinder has four grooves for embedded sensors, and the provided information states that magnetic equipment is included throughout the series. This supports the use of magnetic switches for position detection. For equipment connected to a PLC or requiring motion confirmation, sensor position, switch type, cable routing and detection logic should be confirmed before installation.
6. Adjustable Air Cushioning for End-of-Stroke Control
The provided information states that the MCGB series has built-in adjustable air cushioning. Cushioning helps decelerate the moving component near the end of the stroke and can reduce the risk of impact between the piston and cylinder cover. For strokes of 50 mm or more, or for high-cycle operation, evaluate cushioning together with supply pressure, load mass and throttling speed instead of adjusting only one flow-control component.
The MCGB series uses a single-piston and dual-guide structure. It provides linear drive and integrated guiding in one unit, making it suitable for automation mechanisms that need reduced output-end deflection, compact installation or a simplified external guide arrangement. It is not intended for arbitrary rotary loads or out-of-specification impact. This is what the key difference from standard cylinders.
JOOSUNG is a trusted professional manufacturer of a full range of pneumatic and hardware components, including the solenoid valve, cylinders, fittings and other pneumatic items on OEM or ODM of standard series or even customized items.
