Knowledge

In general, the solenoid valve coil by the coil itself to determine the quality. But in the actual use, we found that if there are some improper in us

1. Pneumatic actuators belong to mechanical instruments and meters. They have life if they are mechanical. 2. the pneumatic actuator has a short life,

1. If there is a movement gap between the feedback rod and the valve stem of the positioner, there will be fluctuations. Use a thin wire to lift a wei

1. Pneumatic device is simple in structure, easy to install and maintain, which is not easy to burn compared with the hydraulic medium, so it is safe

The ordinary double-acting cylinder is generally composed of cylinder cylinder, front and rear cylinder head, piston, piston rod, seals and fasteners

The expansion of the cylinder is to guide the piston to carry out straight reciprocating motion in the cylinder. Is in the cylinder through expansion

The most widely used in all kinds of cylinders is the piston type single piston rod type cylinder, known as the ordinary cylinder. The ordinary cylind

Solenoid valve general flow coefficient and its working pressure difference is very small. For example, the general flow coefficient of 25 solenoid va

MA series pneumatic cylinder and MAL series pneumatic cylinder are widely used，their appearance is similar, many people can not distinguish the differ

AIRTAC solenoid valve is the use of electromagnetic control of industrial equipment, used to control the basic components of fluid automation, belongs

Pneumatic solenoid valve is widely used in our production.Usually pneumatic solenoid valve is: 3 port 2 position, 4 port 2 position, 5 port 2 position

Installation of pneumatic solenoid valve First check whether the components are damaged during transportation, and then install and use them Please pa