News

The switching action of the double-acting cylinder is driven by the air source，including ventilation is on, off and position keep in place; Single-...

1. Before using and installing the cylinder, check the condition of cylinder if any collision, and its connecting parts are tight. 2. In the proces...

The correct maintenance and maintenance of the cylinder method: When the cylinder is repaired and reassembled, the parts must be cleaned, especiall...

1, first check whether the solenoid valve is consistent with the selection parameters, such as the power supply voltage, medium pressure, pressure ...

1. Turn off the air source and remove the hose. 2. Put the wire, DN15 solenoid valve, pagoda head and clamp in order. 3. Install and connect the wi...

Air source pipeline is to provide air source for pneumatic instruments. The main gas source pipeline is generally made of carbon steel pipe, stainl...

The Air Preparation Unit in the pneumatic system usually consists of three parts: 1. Air pressure generating device Including air compressor, contr...

Solenoid valve response time is as quick as in few milliseconds, even the pilot solenoid valve can also be controlled within this standards. Soleno...

The flow loos and its throttling loss is the main factors of the pressure loss of the solenoid valve when the liquid flows through the valve. The l...

Cylinder, solenoid valve and its fittings are the most basic three components in the area of pneumatic. Double acting cylinder, is the need to choo...

First of all, it is clear that the solenoid valve to be used is DC or AC how much is the voltage rating and its current rating. After that, choose ...

Firstly of all, checking the technical data matches your requirements, such as the power supply, the pressure. Or the valve will be disable during ...