What type of cylinder is theSDA Pneumatic cylinder
The sda ultra-thin cylinder has an inner diameter of 80mm for the 80 cylinder and a stroke of 15mm for the 15. The S is equipped with a magnetic ring (magnetic induction). Generally speaking, S stands for magnetic switch, and 2S means two magnetic switches.
The sda cylinder is thin and lightweight: While maintaining the existing motion accuracy and product service life, its total length is only 1/2 to 1/3 of that of a general cylinder. Exert the characteristics of being both thin and light; Ease of installation: It adopts an embedded installation method and does not require any accessories to meet the space-saving requirement. Maintainability: Designed with a simple assembly method, it is convenient for installation, disassembly and maintenance. Simplicity of magnetic control: Assembly slots are reserved around the main body, making the installation, fixation and position adjustment of the magnetic switch extremely simple. High precision and no impact noise: The interior of the front cover is lengthened to enhance guidance and improve accuracy. Rubber buffer plates are placed at the front and rear to eliminate the sound of the piston colliding with the front and rear end covers.
The working medium used in the sda cylinder is dry and clean air that has been filtered to remove water and contains oil mist. Medium and ambient temperature: Specially treated for water removal. Thin cylinders should be stored in a well-ventilated and dry warehouse to prevent moisture and rust. Before installation, a trial test should be conducted under no-load conditions. Only when everything is normal can installation proceed. Select the installation form according to the usage conditions. When installing, pay attention to:
A: The forces applied to the installation of the earrings and the intermediate shaft pin should be in the same plane.
B: For flange installation, the force acting on the flange should be on the same axis as the center of the support. The connection between the flange and the support seat should ensure that the flange surface bears the force rather than the fixed bolts bearing the tensile force.
C: The piston rod of the cylinder is not allowed to bear eccentric or lateral loads. For super-long stroke cylinders, support or guiding devices should be added. Before connecting the cylinder to the pipeline, it is necessary to clear the dirt inside the pipeline. Prevent debris and dust from entering the cylinder cavity. When necessary, the buffer wire core can be adjusted to regulate the buffering effect, preventing the piston from colliding with the cylinder head and damaging the components. During use, the tight parts should be frequently checked to prevent loosening. The diameters of the intake and exhaust pipe joints of the cylinder are generally adapted to the cylinder diameter of the cylinder. Users install one-way throttle valves in the intake and exhaust pipe pipelines according to the usage conditions to adjust the piston rod of the cylinder.
The differences between sda cylinders and sc cylinders
The difference between sda cylinders and sc cylinders is that SC is a standard cylinder, SDA is a thin cylinder, and QGBZ is a heavy-duty cylinder, a single-piston double-acting buffer cylinder with adjustable sides. The external installation dimensions of the cylinder comply with the ISO6430 international standard. The main materials are made of high-quality carbon structural steel, which is sturdy and durable, and suitable for working under harsh conditions.
Above is What Type Of Cylinder Is The SDA Cylinder? What Are The Differences Between The SDA Cylinder And The Sc Cylinder content, to learn more related information are available at https://www.joosungauto.com/.
