Pneumatic finger, also known as finger cylinder, is a professional fixture in the pneumatic industry. It is an executive device that uses compressed air as power to clamp or grab workpieces. Originally originated in Japan, it was widely used by domestic automation enterprises. According to the style, it can usually be divided into Y-type clamp fingers and flat clamp fingers. The cylinder diameter is divided into 16mm, 20mm, 25mm, 32mm and 40mm. Its main function is to replace the grasping work of people, which can effectively improve production efficiency and work efficiency. safety. The SMC Pneumatic Finger Series is one of the most commonly used pneumatic gripper devices in the industry.
Next, Xiaobian from Kexu will bring you the detailed information about the SMC finger cylinder MHZ2 series model parameter selection manual, hoping to solve some small problems that are not clear when choosing cylinders.
SMC finger cylinder MHZ2 series model meaning:
SMC finger cylinder MHZ2 series performance parameters:
SMC finger cylinder MHZ2 series model parameter selection manual-you drive
SMC finger cylinder MHZ2 series features:
The pneumatic finger cylinder can realize various grasping functions and is a key component of modern pneumatic manipulators. In gripping technology, perfect functionality and optimum adaptability are crucial. Finger cylinders have the following features:
All structures are double-acting, capable of two-way grabbing, automatic centering, and high repeatability. The gripping torque is constant. Non-contact travel switch detection can be placed on both sides of the cylinder. Low air consumption, suitable for compressed air with or without oil mist. There are a variety of installation and connection methods, which are easy to install. SMC finger cylinder MHZ2 series selection guide:
SMC finger cylinder MHZ2 series notes:
The distance L of the gripping point and the amount of overhang H should be within the allowable range specified by the air gripper, so as not to bear the excessive torque on the fingers and reduce the service life. When the air gripper clamps the workpiece, considering the size error of the workpiece and the existence of magnetic tape in the magnetic switch, the selected opening and closing stroke should have a certain capacity. The accessories installed on the fingers to clamp the workpiece should be short and light, so as to avoid excessive inertial force when opening and closing, so that the fingers cannot hold the workpiece or affect the life of the air gripper. For extremely thin and thin workpieces, in order to prevent unstable support, position deviation, etc., a concession space should be provided on the accessories. When adjusting, the fingers at the end of the reciprocating action should not be subjected to lateral load or impact load to prevent the fingers from loosening or breaking. At the end of the stroke of the gripper movement, the workpiece and accessories should not touch other objects, and there should be a gap. When inserting the workpiece, it should be fully centered so that the fingers are not subjected to unexpected forces. During debugging, manual or low-pressure drive cylinders can be used for low-speed movement to ensure safety and no impact. Use the speed control valve to adjust the opening and closing speed of the fingers not too fast, so as to avoid excessive impact on the fingers. When unloading the air claw, first confirm that the workpiece is not clamped, and release the compressed air before disassembling. In case of power failure or air source failure, the air pressure drops, causing the workpiece to fall off, measures should be taken to prevent it from falling. The above SMC finger cylinder MHZ2 series model parameter selection manual is introduced here by Kexu Xiaobian. If you want to know more about the SMC finger cylinder MHZ2 series, you can contact our customer service, and we will give you the answer attentively.
