A solenoid valve manifold is a device similar to a solenoid valve in that it controls the flow of liquids or gasses if more than one valve need to be used or controlled. This manif
Mar 14, 2023
1.Direct-acting valves These solenoids have a coil that magnetically opens the valve in a direct action, causing the shaft and the seat of the valve to shift. Direct-acting solenoi
Feb 01, 2023
The solenoid valve is one kind of control elements represent the core of a pneumatic circuit in which precision and reliability can make the difference. With a vairety of sizes and
Feb 19, 2022
Pneumatic cylinders are used in different industries like hydraulics, transportation, vacuuming, ventilation and electronics. They are energy efficient and easy to use, but require
Check the valve label for catalogue number, pressure, voltage and size to ensure it is suitable for the application. Install the valve with the flow direction as indicated by an ar
Solenoid valves are made of a variety of materials and considerations. The basic design of each type of solenoid valve is the same, but it can be constructed in a variety of materi
Jan 29, 2022
1.Check the manufacturer datasheet/instrument nameplate. Confirm the solenoid valve voltage/current ratings. 2.Check the solenoid valve port configuration, like NO(Normal Open) or
Sometimes the main reasons include lack of power in the solenoid coil, burnt coil, wrong voltage, pressure differences (too high or too low), and dirt of the membrane, valve seat,
It is not necessary to remove the valve from the pipe work for maintenance or repair. Suitable repair kits can be ordered. All solenoid valves should be cleaned periodically depend
Jan 23, 2022
Normally open solenoid valves is the valve stays open unless energized. When energy is applied, they immediately close, and stay that way as long as energized. Because of the way t
The Compact Pneumatic Cylinder is one kind of cylinder under ISO 21287 standard with a maximum working pressure of up to 10 bar (1000 k Pa) and bore sizes from 20 mm to 100 mm. Com
The solenoid valve supplying air to that actuator must have four ports: one for air supply (P), one for exhaust (E), and two for the cylinder ports (typically labeled A and B), so