The correct maintenance and maintenance of the cylinder method:
When the cylinder is repaired and reassembled, the parts must be cleaned, especially to prevent the sealing ring from being cut and damaged, and pay attention to the installation direction of the sealing ring.
In use, the cylinder should be regularly checked to see if there is any abnormal phenomenon in each part, whether the connection part is loose, etc., the movable part of the cylinder installed with shaft pin type should be regularly lubricated.
When the cylinder is removed and not used for a long time, all the processed surfaces should be coated with rust-proof oil, and the inlet and exhaust ports should be added with dust-proof plugging.
When the cylinder is repaired and reassembled, the parts must be cleaned, and dirt shall not be brought into the cylinder. In particular, the sealing ring must be prevented from shearing and damage and pay attention to the installation direction of the sealing ring.
