Analysis of SY3000/5000/7000/9000 series pneumatic solenoid directional valves
SY series solenoid directional solenoid valves are very popular in the world.But rare people know what his strengths are.
JOOSUNG pneumatic will introduce the product series of pneumatic directional valve for you.
Which are frequently used in modern industry is a classic SY series solenoid valve, divided into SY3000
SY5000, SY7000, SY9000.
The advantages of SY series solenoid valves are as follows,
1. Electricity saving: Standard product power is 0.35W, energy-saving type is 0.1W. (Other brands’ power are between 0.7W to 1.5W. Using electricity saving pneumatic solenoid valve for 1 month, the savings in electricity costs are equivalent to a free valve）
 |  |
2. Rapid response. A reaction rate in the tens of milliseconds effectively accelerate the pace of production, improve the efficiency of production.
3. Other brands need dozens to hundreds of milliseconds which seriously slow down the pace of production
4.More modules addable such as pressure sensor, separate air supply to shield pressure interference, separate exhaust module, separate pressure regulating module, wire etc.
5.Different size valves can be mixed. The valve block of SY3000 and SY5000 valves can be mixed. The valve block of SY5000 and SY7000 can be mixed.The same assembly valve is used to supply air to the thick cylinder with a large valve and the fine cylinder with a small valve.
6.Mixed loading of different air ports. C6 pipe, C8 pipe, M5 pipe and so on can be installed, the outlet can choose straight, right angle, right angle up or down. It is convenient to connect cylinders with different interfaces directly, reducing pressure loss without changing diameter.
7.Three different interface modes can be supported, such as the lower interface, side interface and upper interface. Convenient installation of controller in any location, reducing tracheal bending, reducing waste and loss caused by compressed air.
8.Low power consumption so it can be driven directly by PLC without relay, saving cost.Does not burn the coil, does not burn the PLC. No need for relays, cost saving. Does not burn the coil, does not burn the PLC.
9.For products with the same flow and pressure, our products only have tens of grams while other brands have hundreds of grams. Small size, save installation space and cover size and cost.
Wenzhou Qiaosen pneumatic Co., LTD (Brand known as Joosung) is specialized in manufacturing pneumatic products and has ten years of OEM experience. The SY series solenoid valves are mainly sold to Mexico, Pakistan, India, Indonesia, Vietnam, Canada, Australia and other countries.We promise that every product will pass 100% qualified test before delivery, and provide two-year quality guarantee for the products under the condition of excellent air source condition. Welcome to get more information from us and make the order.
Email:Carson@joosungauto.com
