Remove the SY5220-5D-01 pneumatic solenoid valve stem and clean the internal parts, such as the plunger, seal, spring, and o-ring, using a clean cloth or brush and a suitable solvent, such as isopropyl alcohol. Blow compressed air through the small orifices to remove dust and debris.
Inspect the internal parts for signs of wear, damage, or deterioration. Check the seal for swelling, cracking, or leakage. Check the spring for broken coils. Check the plunger for smooth movement and alignment. Check the SY5220-5D-01 pneumatic solenoid valve body for deposits, swelling, or rust. Replace any worn-out or damaged parts as needed.
|
Series |
SY3000 |
SY5000 |
SY7000 |
SY9000 |
|
|
Fluid |
Air |
||||
|
Internal pilot |
2 position single |
0.15 to 0.7 |
|||
|
2 position double |
0.1 to 0.7 |
||||
|
3 position |
0.2 to 0.7 |
||||
|
Ambient and fluid temperature (C) |
-10 to 50 (No freezing) |
||||
|
Max.operating |
2 position single,double |
10 |
5 |
5 |
5 |
|
3 position |
3 |
3 |
3 |
3 |
|
|
Manual override (Manual operation) |
Non-locking push type |
||||
|
Pilot exhaust method |
Common exhaust type for main and pilot valve |
||||
|
Lubrication |
Not required |
||||
|
Mounting orientation |
Unrestricted |
||||
|
Impact/Vibration resistance(m/s²)Note) |
150/30 |
||||
|
Enclosure |
Dust proof (*DIN terminal and M8 connector:IP65) |
||||
Hot Tags: sy5220-5d-01 pneumatic solenoid valve, China, suppliers, manufacturers, factory, custom, wholesale, SY5120 5LZ C8, SY5120 5LZD C6, SY5120 5G C6, SY5220 5LZD C8, SY5120 5G 01, SY5120 5LZD C8
